Liner Replacement Done Right in Pompano Beach
When an existing liner, clay or metal, has reached the end, we take it out and set a new one built for this climate.
- American Owned & Operated
- Free Written Quotes
- Upfront Pricing
- Same-Day Service Available
Not every liner can be saved, and not every flue has room for a liner-inside-a-liner. When an old metal liner has corroded through, or crumbling clay tiles crowd the flue too tightly, replacement is the honest answer: the failed liner comes out, and a new one takes its place. It is more involved than relining an open flue, and it is also the cleaner long-term result.
Around Pompano Beach the replacement conversation almost always includes salt. Galvanized liners that would coast through a decade inland can pit and fail early within reach of ocean spray, which is most of this zip code. We spec accordingly, because the second-cheapest liner that lasts is far cheaper than the cheapest one that doesn't.
What the Work Involves
What Your Visit Covers
Old liner removal
Corroded metal or collapsed tile sections come out so the new system starts clean.
Flue prep
The open flue is cleared and checked before anything new goes in.
New liner installation
A continuous replacement liner is set, sized and sealed for your fireplace.
Top-end weatherproofing
The termination is flashed and capped so the new liner starts life protected from rain and spray.
Warning Signs to Watch
- A metal liner showing rust-through, pitting, or flaking.
- Debris that keeps returning to the firebox after cleaning.
- A liner installed decades ago and never revisited.
- Draft problems that a sweep and cap check didn't resolve.
What to Expect
Assess
We determine whether your liner can be worked around or genuinely needs to come out.
Swap
Out with the failed liner, in with a continuous marine-grade replacement.
Seal and check
Terminations are weatherproofed and the draft is verified.
Ready for honest chimney liner replacement help?
Free written quotes · Same-day service available · No hidden fees
Frequently Asked Questions
Relining vs. liner replacement, what's the difference?
Relining threads a new liner through what is already there. Replacement removes the failed liner first. When the old liner is collapsed, corroded, or leaves no room, replacement is the right path.
Why did my metal liner corrode so fast?
Beach air. Chloride-carrying breeze finds every metal component near the coast, and lighter-gauge or galvanized liners lose that fight early. Replacements here should be marine-grade stainless.
Will my fireplace work better afterward?
A correctly sized new liner very often improves draft noticeably. Smoke goes up more decisively and the fireplace is easier to run.
How disruptive is the work?
Everything takes place in the flue and at the roof. We protect the room, contain the mess, and most jobs wrap in a day.
Do you put the price in writing?
Always. A written quote reaches you before a single tool comes out, and the figure you approve is what the invoice shows.
Is chimney liner repair an option, or is replacement the only route?
Both exist and they are different scopes. A defect at one identifiable point, such as a joint or a connection at the appliance, supports a repair. Damage repeating along the whole length does not, because the surface that contains heat and gases is no longer continuous. What was actually seen, and where, should decide it.
You Might Also Need
Deciding whether the old liner has to come out
Removal is the expensive half of a liner replacement, so it deserves a direct answer rather than an assumption. Sometimes a new liner can be threaded through what is already in the flue, and sometimes it cannot. Collapsed clay sections, a corroded metal liner that has lost its shape, and a flue whose remaining opening is too narrow for a correctly sized replacement all force removal. Ask which of those applies to your chimney, and ask how that was determined, because the answer drives most of what the job costs.
There is a middle case worth naming out loud. A flue can be technically passable at a smaller liner size, which means you could skip removal and accept a diameter that does not match your fireplace. That is a real choice with a real consequence: less disruption now, and a fireplace that never drafts well afterward. If someone offers it, have them state plainly what the reduced size does to performance. A smaller liner under a large open firebox is a compromise to make deliberately rather than discover on the first evening you light a fire.
What an open flue lets you settle once
Tile removal is disruptive and nobody wants to repeat it, so treat the open flue as a chance to decide several things at the same time. Insulating the new liner is far easier while there is room to work around it. Correcting a diameter that was wrong from the start costs very little at this moment and a great deal later. If the chimney carries a second flue for a furnace or a water heater, its condition is worth assessing on the same visit rather than on a separate one later.
Look well past this season rather than at it. Any change you are likely to make to the appliance below belongs in the conversation now, since sizing follows the appliance. Access details matter too: how the top terminates, whether a future cap can come off without unsealing the collar, and whether the liner can be swept from the top or has to be reached from below. Written answers to those questions are worth more than they seem while the chimney is still open and everyone is standing there.
What the written scope should cover on a liner swap
A replacement scope carries obligations that a straight reline does not, and they should appear on paper. Name who breaks out the old tile, how the debris leaves the property, and where it goes. Say whether any masonry has to be opened for access at an offset or at the base, and who closes and finishes it afterward. Interior protection deserves a line of its own, because the work runs from the roof down to the firebox and fine dust travels that whole distance if nobody has agreed to contain it.
Change orders are the other thing to settle in advance. Old flues hide surprises, and the honest way to handle that is a stated unit rate for additional work plus a rule about who approves it before it happens. Agree that nothing outside the written scope proceeds without your say-so, in writing, and that a text message on your phone counts. That single clause turns an unpleasant surprise into a decision you get to make, which is the entire difference between the two experiences.
Timing a replacement against a fuel or appliance change
Liner sizing follows whatever burns below it, which makes the appliance decision the first one rather than the last. A wood-burning insert, a gas log set, and an open masonry firebox each want different things from the same chimney, and switching between them after a liner is in can strand you with the wrong diameter. If a conversion has been on your mind at all, this is the moment to make the call, even if the appliance itself gets bought much later.
Two smaller timing questions belong in the same conversation. Wind-driven rain arrives roughly between June and November, so an unsealed termination is more exposed in some months than in others, and a job started late in the day should not be left open overnight. Cure times on any masonry work at the base also set how soon the fireplace can be used again. Ask for the full sequence with the waiting periods written into it rather than a count of working days on their own.
Deciding between a liner repair and a full replacement
Chimney liner repair and liner replacement get used interchangeably and they carry very different scopes. A repair addresses a defined defect, a failed joint, a loose connection at the appliance, or a damaged termination, and leaves the rest of the liner in service. A replacement removes or lines over the existing system because the surface itself is no longer continuous along its length.
What should decide it is a description of what was found and where, not a preference. A defect at one identifiable point supports a repair. Cracking or corrosion that repeats the whole way up does not, and a repair quoted against that condition is buying time on a system that has already stopped doing its job. Ask which pattern was observed before agreeing to either scope.
Part of our Chimney Repair work in Pompano Beach and across south Broward County.